This instructor-led, live training in 横浜 (online or onsite) is aimed at intermediate-level automotive engineers and technicians who wish to gain hands-on experience in testing, simulating, and diagnosing ECUs using Vector tools like CANoe and CANape.
By the end of this training, participants will be able to:
Understand the role and function of ECUs in automotive systems.
Set up and configure Vector tools such as CANoe and CANape.
Simulate and test ECU communication on CAN and LIN networks.
Analyze data and perform diagnostics on ECUs.
Create test cases and automate testing workflows.
Calibrate and optimize ECUs using practical approaches.
This instructor-led, live training in 横浜 (online or onsite) is aimed at intermediate-level automotive engineers and embedded systems developers who wish to understand the theoretical aspects of ECUs, focusing on Vector-based tools and methodologies used in automotive design and development.
By the end of this training, participants will be able to:
Understand the architecture and functions of ECUs in modern vehicles.
Analyze communication protocols used in ECU development.
Explore Vector-based tools and their theoretical applications.
Apply model-based development principles to ECU design.
This instructor-led, live training in 横浜 (online or onsite) is aimed at intermediate-level embedded systems engineers and AI developers who wish to deploy machine learning models on microcontrollers using TensorFlow Lite and Edge Impulse.
By the end of this training, participants will be able to:
Understand the fundamentals of TinyML and its benefits for edge AI applications.
Set up a development environment for TinyML projects.
Train, optimize, and deploy AI models on low-power microcontrollers.
Use TensorFlow Lite and Edge Impulse to implement real-world TinyML applications.
Optimize AI models for power efficiency and memory constraints.
In this instructor-led, live training in 横浜, participants will learn how to program the Arduino using advanced techniques as they step through the creation of a simple sensor alert system.
By the end of this training, participants will be able to:
Understand how Arduino works.
Dig deep into the main components and functionalities of Arduino.
Program the Arduino without using the Arduino IDE.
This instructor-led, live training in 横浜 (online or onsite) is aimed at engineers who wish to learn how to use embedded C to program various types of microcontrollers based on different processor architectures (8051, ARM CORTEX M-3, and ARM9).
In this instructor-led, live training in 横浜, participants will learn how to program the Arduino for real-world usage, such as to control lights, motors and motion detection sensors. This course assumes the use of real hardware components in a live lab environment (not software-simulated hardware).
By the end of this training, participants will be able to:
Program Arduino to control lights, motors, and other devices.
Understand Arduino's architecture, including inputs and connectors for add-on devices.
Add third-party components such as LCDs, accelerometers, gyroscopes, and GPS trackers to extend Arduino's functionality.
Understand the various options in programming languages, from C to drag-and-drop languages.
Test, debug, and deploy the Arduino to solve real world problems.
An ARM processor is one of a family of CPUs based on the RISC (reduced instruction set computer) architecture developed by Advanced RISC Machines (ARM).
In this instructor-led, live training, participants will learn how to build a robot using Arduino hardware and the Arduino (C/C++) language.
By the end of this training, participants will be able to:
Build and operate a robotic system that includes both software and hardware components
Understand the key concepts used in robotic technologies
Assemble motors, sensors and microcontrollers into a working robot
Design the mechanical structure of a robot
Audience
Developers
Engineers
Hobbyists
Format of the course
Part lecture, part discussion, exercises and heavy hands-on practice
Note
Hardware kits will be specified by the instructor before the training, but will roughly contain the following components:
Arduino board
Motor controller
Distance sensor
Bluetooth slave
Prototyping board and cables
USB cable
Vehicle kit
Participants will need to purchase their own hardware.
If you wish to customize this training, please contact us to arrange.
Buildroot is an open-source project that contains scripts that produce a cross-compilation toolchain, a customizable root filesystem image, and a Linux kernel for embedded devices. During this practical course, participants will learn how to use it:
How to select software that goes into the root filesystem.
How to add new packages and modify existing ones.
How to add support for new embedded boards.
During the course, bootable filesystem images will be produced. Remote courses are delivered using the QEMU emulator, while in the classroom it is possible to use either QEMU or real embedded boards of the trainer's choice.
Other projects with similar goals include the Yocto project and OpenWRT. Please use these presentations to determine which one is the right choice for your needs.
This instructor-led, live training in 横浜 (online or onsite) is aimed at engineers and computer scientists who wish to apply the fundamentals of circuits and electronics to design devices and systems that utilize properties of electrical components for the development of hardware functionalities.
By the end of this training, participants will be able to:
Set-up and configure the necessary tools and programs for circuits and circuit board development.
Understand the basic principles behind circuits and electronics engineering.
Utilize the primary electronic components in constructing efficient computer hardware technologies.
Optimize electronic devices by implementing circuit analysis methods.
Apply the fundamentals of electronics and circuits to the development of enterprise applications.
Is C++ suitable for embedded systems such as microcontrollers and real-time-operating-systems?
Should object-oriented-programming be used in microcontrollers?
Is C++ too far removed from the hardware to be efficient?
This instructor-led, live training addresses these questions and demonstrates through discussion and practice how C++ can be used to develop embedded systems with code that is accurate, readable, and efficient. Participants put theory into practice through the creation of a sample embedded application in C++.
By the end of this training, participants will be able to:
Understand the principles of object-oriented modelling, embedded software programming and real-time programming
Produce code for embedded systems that is small, fast and safe
Avoid code bloat from templates, exceptions, and other language features
Understand the issues related to using C++ in safety-critical and real-time systems
Debug a C++ program on a target device
Audience
Developers
Designers
Format of the course
Part lecture, part discussion, exercises and heavy hands-on practice
This instructor-led, live training in 横浜 (online or onsite) is aimed at engineers and scientists who wish to learn and apply DSP implementations to efficiently handle different signal types and gain better control over multi-channel electronic systems.
By the end of this training, participants will be able to:
Setup and configure the necessary software platform and tools for Digital Signal Processing.
Understand the concepts and principles that are foundational to DSP and its applications.
Familiarize themselves with DSP components and employ them in electronics systems.
Generate algorithms and operational functions using the results from DSP.
Utilize the basic features of DSP software platforms and design signal filters.
Synthesize DSP simulations and implement various types of filters for DSP.
A two day course covering all design principles with code examples coupled with recent industrial technology; very useful for automotive software developers
This instructor-led, live training (online or onsite) is aimed at C developers wishing to learn embedded C design principles.
By the end of this training, participants will be able to:
Understand the design considerations that make embedded C programs reliable
Define the functionality of an embedded system
Define the program logic and structure to obtain the desired result
Design a reliable, error-free embedded application
Obtain optimal performance from target hardware
Format of the Course:
Interactive lecture and discussion
Exercises and practice
Hands-on implementation in a live-lab environment
Course Customization Options:
To request a customized training for this course, please contact us to arrange.
Course Objectives
To provide an understanding of the essentials of embedded GNU/Linux, how the bits and pieces fit together. What components are needed to build an embedded GNU/Linux system, where to get them from and how to configure/build/install them? Where to get help from? What about those software licenses? Hands-on exercises provide you with the necessary practical experience to go ahead and develop your own embedded GNU/Linux systems after completing this training successfully.
Description
This five day training class uses hands-on exercises combined with instruction to illustrate the concepts of embedded GNU/Linux. It is designed to bring you quickly up to speed. The philosophy, concepts and commands necessary to make effective use of GNU/Linux are described through a combination of theory and on-the-job training.
Don't reinvent the wheel, but learn from an experienced trainer and take home a working knowledge of GNU/Linux and the ability to use it effectively in your own embedded development project.
Who should attend?
Managers, project managers, software-, hardware-, development-, systems engineers, testers, administrators, technicians and other parties interested in the technology, who want to understand as quickly as possible how Embedded GNU/Linux works. You must use GNU/Linux or you have to luxury to decide whether it makes sense to use it or not. Maybe you already tried to use Embedded GNU/Linux, but are not quite sure that you did everything the right way. You currently use a different operating system and wand to figure out whether GNU/Linux might better and/or cheaper.
Delivery Options
All the training material is English, but the presentation of it can be in English or in German, as you wish, worldwide.
A two day course consisting of around 60% hands-on labs focusing on Embedded Linux kernel internals, architecture, development and investigating how to write and integrate several types of device drivers.
Who should attend?
Engineers interested in Linux kernel development on Embedded systems and plateforms.
This is a two day course covering all basic principles of building Embedded linux Systems, around 60% of the entire course time is practical hands-on implementation for real world application using the same standards and tools used in industry
This training intends to introduce C++ as the common extension of C when applying object-oriented embedded system development. Since C++ encloses C, this training takes us from C to C++ in a natural way, and looks under the hood of how C++ is implemented. This is especially valuable to comprehend when applying C++ in an embedded resource limited environment. The C++ standard has recently been undergoing a major revision, a.k.a. as C++11, and a new one is on its way, C++14. This course addresses subjects brought in with these revisions that are especially useful like high performance memory management, concurrency making use of a multicore environment, and bare-metal close to the hardware programming.
GOAL/BENEFITS
The major objective of this class is that you shall be able to use C++ in a “correct way”.
Introduce C++ as an object oriented language alternative in an embedded system context
Show the similarities ‑ and differences ‑ with the C language
Comprehend different memory management strategies – especially the move semantics introduced with C++11
Look under the hood and understand what different paradigms in C++ leads to in machine code
Use templates to achieve type safe high order abstractions for bare-metal close to the hardware programming – memory mapped I/O as well as interrupts – especially the variadic templates introduced with C++11
Provide some useful design patterns especially applicable in an embedded context
A few exercises in order to practice some concepts
AUDIENCE/PARTICIPANTS
This training is aimed C++- programmers who intend to start using C++ in an embedded system context.
PREVIOUS KNOWLEDGE
The course requires basic knowledge in C++ programming, corresponding to our trainings ”C++ – Level 1” and ”C++ Level 2 – Introducing C++11”.
PRACTICAL EXERCISES
During the training you will practice the presented concepts in a number of exercises. We will use the open and free integrated development environment from Eclipse
In this instructor-led, live training in 横浜 participants will learn step-by-step how to build an embedded Linux system from the ground up. From building a minimalistic kernel to configuring the bootup and initialization processes, participants will learn the tools, techniques and mindset needed to deploy a fully functional embedded Linux system.
For remote trainings, QEMU will be used to emulate the hardware. Other platforms, including real hardware devices, can be considered on a case by case basis.
An embedded system is a computer system with a dedicated function within a larger mechanical or electrical system, often with real-time computing constraints.
This instructor-led, live training in 横浜 (online or onsite) is aimed at engineers who wish to design high-performance embedded systems using FPGA.
By the end of this training, participants will be able to:
Install and configure the FPGA software tools needed to design and simulate an embedded system.
Select the best FPGA architecture for an application.
In this instructor-led, live training in 横浜, participants will learn how to code using FreeRTOS as they step through the development of a simple RTOS project using a microcontroller.
By the end of this training, participants will be able to:
Understand the basic concepts of real-time operating systems.
Learn the environment of FreeRTOS.
Learn how to code with FreeRTOS.
Interface a FreeRTOS application to hardware peripherals.
In this instructor-led, live training in 横浜, participants will learn the fundamentals of IoT as they step through the creation of an Arduino-based IoT sensor system.
By the end of this training, participants will be able to:
Understand the principles of IoT, including IoT components and communication techniques.
Learn how to use Arduino communication modules that can be used for different IoT systems.
Learn how to use and program a mobile app to control Arduino.
Use a Wi-Fi module to connect the Arduino to another device.
Description
This 5-day training class uses hands-on exercises combined with instruction to illustrate the concepts of GNU/Linux kernel internals and device driver development. It is desinged to bring you quickly up to speed. We describe processes, concepts and commands necessary to write GNU/Linux device drivers through a combination of theory and on-the-job training.
Don't reinvent the wheel, but learn from an experienced trainer and take home a working knowledge and the ability to use it effectively in your own embedded development project.
Who should attend?
People with interest in or tasked with the development or evaluation of developing GNU/Linux device drivers like software engineers, field engineers, (project) managers, hardware engineers.
This instructor-led, live training in 横浜 (online or onsite) is aimed at FPGA developers who wish to use Vivado to design, debug, and implement hardware solutions.
By the end of this training, participants will be able to:
The LEDE Project (Linux Embedded Development Environment) is a Linux operating system based on OpenWrt. It is a complete replacement for the vendor-supplied firmware of a wide range of wireless routers and non-network devices.
In this instructor-led, live training, participants will learn how to set up a LEDE based wireless router.
Audience
Network administrators and technicians
Format of the course
Part lecture, part discussion, exercises and heavy hands-on practice
Model Based Development (MBD) is a software development methodology that enables faster, more cost-effective development of dynamic systems such as control systems, signal processing and communication systems. It relies on graphic modeling rather than the traditional text based programming.
In this instructor-led, live training participants will learn how to apply MBD methodologies to reduce development costs and accelerate the time to market of their embedded software products.
By the end of this training, participants will be able to
Select and utilize the right tools for implementing MBD.
Use MBD to carry out rapid development in the early stages of their embedded software project.
Shorten the release of their embedded software into the market.
Format of the course
Part lecture, part discussion, exercises and heavy hands-on practice
This instructor-led, live training in 横浜 (online or onsite) is aimed at engineers who wish to implement NetApp ONTAP.
By the end of this training, participants will be able to:
Set up and administer ONTAP 9.3 Cluster (3 days).
Safeguard data through Data Protection technologies (2 days).
PCB (Printed Circuit Board) Circuit Design refers to the process of designing, etching, and printing circuits on a signal boards layout. EAGLE is a freely available desktop application for designing PCBs.
In this instructor-led, live training, participants will learn how to use the Eagle software to create PCB circuit boards. The course starts by examining a set of existing schematics, then drawing out an original circuit in Eagle. The training steps through process for designing the circuit board and discusses the process for manufacturing the boards (the course does not include the physical manufacturing of the boards).
By the end of this training, participants will be able to:
Create a Printed Circuit Board (PCB) from any schematic
Create schematics and design circuit boards using Eagle
Export the industry-standard files for constructing the circuit board
Audience
Engineers
Technicians
Format of the Course
Part lecture, part discussion, exercises and heavy hands-on practice
Notes
To request a customized training for this course, please contact us to arrange.
PCB (Printed Circuit Board) Circuit Design refers to the process of designing, etching, and printing circuits on a signal boards layout. Altium Designer is a freely available desktop application for designing PCBs.
In this instructor-led, live training, participants will learn how to use the Altium software to create PCB circuit boards. The course starts by examining a set of existing schematics, then drawing out an original circuit in Altium. The training steps through process for designing and manufacturing the circuit board.
By the end of this training, participants will be able to:
Create a Printed Circuit Board (PCB) from any schematic
Create schematics and design circuit boards using Altium
Print and etch a physical circuit board
Export the industry-standard files for sending to a large-scale manufacturer
Audience
Engineers
Technicians
Format of the Course
Part lecture, part discussion, exercises and heavy hands-on practice
Notes
To request a customized training for this course, please contact us to arrange.
Raspberry Pi is a very small, single-board computer.
In this instructor-led, live training, participants will learn how to set up and program the Raspberry Pi to serve as an interactive and powerful embedded system.
By the end of this training, participants will be able to:
Set up an IDE (integrated development environment) for maximum development productivity
Program Raspberry Pi to control devices such as motion sensor, alarms, web servers and printers.
Understand Raspberry Pi's architecture, including inputs and connectors for add-on devices.
Understand the various options in programming languages and operating systems
Test, debug, and deploy the Raspberry Pi to solve real world problems
Audience
Developers
Hardware/software technicians
Technical persons in all industries
Hobbyists
Format of the course
Part lecture, part discussion, exercises and heavy hands-on practice
Note
Raspberry Pi supports various operating systems and programming languages. This course will use Linux-based Raspbian as the operating system and Python as the programming language. To request a specific setup, please contact us to arrange.
Participants are responsible for purchasing the Raspberry Pi hardware and components.
A real-time operating system (RTOS) is an operating system (OS) intended to serve real-time application process data as it comes in, typically without buffering delays.
This instructor-led, live training in 横浜 (online or onsite) is aimed at engineers who wish to write, load and run machine learning models on very small embedded devices.
By the end of this training, participants will be able to:
Install TensorFlow Lite.
Load machine learning models onto an embedded device to enable it to detect speech, classify images, etc.
Add AI to hardware devices without relying on network connectivity.
In this instructor-led, live training in 横浜, participants will learn how to create a build system for embedded Linux based on Yocto Project.
By the end of this training, participants will be able to:
Understand the fundamental concepts behind a Yocto Project build system, including recipes, metadata, and layers.
Build a Linux image and run it under emulation.
Save time and energy building embedded Linux systems.
Description
This four day training combines theory with hands-on exercises in order to introduce the Yocto Project. It answers frequently asked questions like:
Is it really necessary to use another version of the toolchain/libraries/packages for each and every GNU/Linux project and an top of that to follow a different work-flow?
Can you ensure that the development environment is identical for all developers/suppliers and that you can still produce identical builds like today in 10+ years from now?
Can the YP help find out under what software licenses the packages you use are licensed?
Hands-on sessions are performed on target hardware (e.g. Beagle Bone Black Rev. C - http://beagleboard.org/BLACK). After the training you will be able to download a docker image with Ubuntu 14.x and all dependencies pre-installed plus the examples in order to work with the course material in your own labs. Please note that this is not an introductory course to Embedded GNU/Linux. You should already know how Embedded GNU/Linux works and how to configure/build the GNU/Linux kernel and kernel drivers.
Who should attend?
You already use GNU/Linux for your projects and have probably heard about the Yocto Project, but did not dare to have a closer look into it, or had difficulties using it. You don’t know whether and how your daily work-flow can be accommodated in the YP and generally find the YP rather complicated. Why do we need all this since up to know everything was (supposedly) much easier? After the training you should be able to decide whether you need the YP or not. The workshop is aimed at software-, development-, system engineers, testers, administrators, engineers and other parties interested in the YP, with a solid knowledge of Embedded GNU/Linux.
This course provides a comprehensive introduction to the Zig programming language, covering its syntax, memory management, application development, and advanced features. Participants will gain hands-on experience with Zig’s unique approach to safety, performance, and interoperability, making it a strong alternative to C and Rust. The course includes practical exercises to reinforce learning and build confidence in writing efficient, reliable Zig programs.
続きを読む...
Last Updated:
お客様の声 (15)
より多くの演習を行ったほうが学習には効果的かもしれませんが、時間が少なすぎました
Gianpiero Arico' - Urmet Spa
コース - Embedded Linux Systems Architecture
Machine Translated
He answers my questions very well explained.
Khaled Almarzooqi - Beamtrail
コース - Circuits and Electronics Fundamentals
Sean was a dynamic speaker and the hands-on exercises were very interesting and I can see how they will be really applicable.
Temira Koenig - Yeshiva University
コース - Raspberry Pi for Beginners
Interactivity, time for self-contained programming. I learn easier if I have the chance to find out the answer and not just telling me it. It was also a very good thing that the training was well-planned, we kept coffee pauses and the training did not lose my attention. The trainer had very deep knowledge in C++, we felt we could ask anything.
Barna Szecsi - GIS Europe SE
コース - C++ for Embedded Systems
I thought the content (both theory and practical) was excellent, and exactly what we were wanting/expecting. The exercises were challenging but achievable.
Mike Kleinau - iVolve
コース - Introduction to Embedded Linux (Hands-on training)
